Planet Networking & Communication WGS3-2820 User Manual page 189

4.5.4.8 DiffServ Service Configuration
Use this page to define the DiffServ policy on each port.
Slot.Port - Select the Slot.Port that uniquely specifies an interface. This is a list of all valid slot number and port
。
number combinations in the system. For Read/Write users where 'All' appears in the list, select it to specify all
interfaces.
Policy In - This lists all the policy names of type 'In' from which one can be selected. If 'none' is selected, this will
。
detach the policy from the interface in this direction. This field is not shown for Read/Write users where inbound
service policy attachment is not supported by the platform.
Policy Out - This lists all the policy names of type 'Out' from which one can be selected. If 'none' is selected, this
。
will detach the policy from the interface in this direction. This field is not shown for Read/Write users where
outbound service policy attachment is not supported by the platform.
Figure 4-5-20 DiffServ Policy Class Definition – Assign Queue
Figure 4-5-21 DiffServ Policy Attribute Summary
User's Manual of WGS3-2820/WGS3-5220
189