Planet Networking & Communication WGS3-2820 User Manual page 306

Hello Interval - Enter the time in seconds between the transmission of which PIM Hello messages on this interface.
o
The valid values are from (10 to 3600 secs) . The default value is 30.
CBSR Preference - Enter the preference value for the local interface as a candidate bootstrap router. The value of
o
-1 is used to indicate that the local interface is not a candidate BSR interface. The valid values are from (-1 to 255)
The default value is 0.
CBSR Hash Mask Length - Enter the CBSR hash mask length to be advertised in bootstrap messages if this
o
interface is elected as the bootstrap router. This hash mask length will be used in the hash algorithm for selecting the
RP for a particular group. The valid values are from (0 to 32). The default value is 30.
CRP Preference - Enter the preference value for the local interface as a candidate bootstrap router. The value of -1
o
is used to indicate that the local interface is not a candidate BSR interface. The valid values are from (-1 to 255). The
default value is 0.
Command Buttons
Submit - Send the updated configuration to the router. Configuration changes take effect immediately. These
o
changes will not be retained across a power cycle unless a save is performed.
User's Manual of WGS3-2820/WGS3-5220
306