4.3.5.1 IGMP Snooping Configuration and Status
Use this menu to configure the parameters for IGMP Snooping, which is used to build forwarding lists for multicast traffic. Note
that only a user with Read/Write access privileges may change the data on this screen.
Configurable Data
Admin Mode - Select the administrative mode for IGMP Snooping for the switch from the pulldown menu. The
。
default is disable.
Non-Configurable Data
Multicast Control Frame Count - The number of multicast control frames that are processed by the CPU.
。
Interfaces Enabled for IGMP Snooping - A list of all the interfaces currently enabled for IGMP Snooping.
。
Data Frames Forwarded by the CPU - The number of data frames forwarded by the CPU.
。
VLAN Ids Enabled For IGMP Snooping - Displays VLAN Ids enabled for IGMP snooping.
。
Command Buttons
Submit - Update the switch with the values you entered. If you want the switch to retain the new values across a
。
power cycle you must perform a save. You will only see this button if you have Read/Write access privileges.
Figure 4-3-19 IGMP Snooping Configuration and Status
User's Manual of WGS3-2820/WGS3-5220
117