Table of Contents
Advertisement
added to the table as a result of a learning process or protocol.
▫
Description - The text description of this multicast table entry.
▫
Interfaces - The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
8.6.41 show mac-address-table multicast
This command displays the Multicast Forwarding Database (MFDB) information. If the command is entered with no parameter,
the entire table is displayed. This is the same as entering the optional all parameter. The user can display the table entry for one
MAC Address by specifying the MAC address as an optional parameter.
▫
Format
show mac-address-table multicast [<macaddr> | all]
▫
Mode
Privileged EXEC
▫
Mac Address - A unicast MAC address for which the switch has forwarding and or filtering information. The format is 6 or
8 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an IVL system the
MAC address will be displayed as 8 bytes.
▫
Type - This displays the type of the entry. Static entries are those that are configured by the end user. Dynamic entries are
added to the table as a result of a learning process or protocol.
▫
Component - The component that is responsible for this entry in the Multicast Forwarding Database. Possible values are
IGMP Snooping, GMRP, and Static Filtering.
▫
Description - The text description of this multicast table entry.
▫
Interfaces - The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
▫
Forwarding Interfaces - The resultant forwarding list is derived from combining all the component's forwarding interfaces
and removing the interfaces that are listed as the static filtering interfaces.
8.6.42 show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC Filters. If <all> is selected, all the Static MAC
Filters in the system are displayed. If a macaddr is entered, a vlan must also be entered and the Static MAC Filter information
will be displayed only for that MAC address and VLAN.
▫
Format
show mac-address-table static {<macaddr> <vlanid> | all}
▫
Mode
Privileged EXEC
▫
MAC Address - Is the MAC Address of the static MAC filter entry.
▫
VLAN ID - Is the VLAN ID of the static MAC filter entry.
▫
Source Port(s) - Indicates the source port filter set's slot and port(s).
▫
Destination Port(s) - Indicates the destination port filter set's slot and port(s).
8.6.43 show mac-address-table staticfiltering
This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB) table.
▫
Format
show mac-address-table staticfiltering
▫
Mode
Privileged EXEC
User's Manual of WGS3-2820/WGS3-5220
361
Advertisement
Table of Contents
