Table of Contents
Advertisement
User's Manual of WGSW-24020/WGSW-48040
4.6 ACL
An ACL consists of a set of rules which are matched sequentially against a packet. When a packet meets the match criteria of a
rule, the specified rule action (Permit/Deny) is taken and the additional rules are not checked for a match. On this menu the
interfaces to which an ACL applies must be specified, as well as whether it applies to inbound or outbound traffic. Rules for the
ACL are specified/created using the ACL Rule Configuration menu.
4.6.1 IP Based ACL
The IP Based ACL (Access Control List) screen (see figure 4-27) contains information for defining IP Based ACLs.
Figure 4-27 IP-Base ACL screen
-57-
Advertisement
Table of Contents
