Show Authentication Methods; Password - Planet Networking & Communication WGSW-24010 User Manual

3.3.7 show authentication methods

The authentication methods privilege EXEC command displays information about the authentication methods.
Syntax
show authentication methods
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the authentication configuration.
console# show authentication methods
Login Authentication Method Lists
-----------------------------------
Default: Radius, Local, Line
Console_Login: Line, None
Enable Authentication Method Lists
-----------------------------------
Default: Radius, Enable
Console_Enable: Enable, None
Line Login Method List
------------------------- ----------------------------------------
Console Console_Login
Telnet Default
SSH Default
HTTP: Radius, local
HTTPS: Radius, local
802.1x: Radius

3.3.8 password

The password line configuration command specifies a password on a line. To remove the password, use the no form of
this command.
Syntax
password password [encrypted]
no password
§ password — Password for this level, from 1 to 159 characters in length.
§ encrypted — Encrypted password to be entered, copied from another device configuration.
Default Configuration
This command has no default configuration.
Enable Method List
-----------------------------------
Console_Enable
Default
Default
16