Mitel 6867i Administrator's Manual page 47

The above example uses TFTP to download all firmware files that exist in the "test1" directory
on the specified server, to the phone
Note: Specifying the download of a ".st" file is not supported. For example, the following
filename should NEVER be entered as a value string for the "firmware server"
parameter:
firmware server: tftp://10.30.102.158/test1/67i.st
To download a partial from another specified server:
firmware server: /path
The above example uses the configuration server that is linked to the partial path to load the
firmware.
SPECIFYING A SERVER TO DOWNLOAD FIRMWARE FILES
You can use the following parameter to specify a server other than the original configuration
server from which the phones get their firmware:
• firmware server
CONFIGURATION FILES
For the specific parameter(s) you can set in the configuration files, see Appendix A, the section,
"Multiple Configuration Server Settings"
CSV DIRECTORY FILES, LANGUAGE PACKS, TLS CERTIFICATES, 802.1X
CERTIFICATES, HTTPS FILES AND MULTIPLE CONFIGURATION
SERVERS
The CSV directory files, language packs, TLS certificate files, 802.1x certificate files, and
HTTPS files can also be downloaded to the phone from a server other than the configuration
server. For each of these types of files, you can specify a URL (server IP address) from which
the phone gets these files. You can use existing parameters on the phone to specify the URL.
For applicable parameters, see
Phones" on page 1-29.
.
on page A-29
.
"Specifying a Server Using Existing Parameters on the IP
Firmware and Configuration Files
1-27