Message Indicator Lamp; Programmable Buttons; Dialpad Buttons; Speaker - Mitel MiVoice Office 250 User Manual

Getting Started

Message Indicator Lamp

The Message Indicator lamp flashes or stays lit to indicate call, message, and feature activity.
See "Using Messages" on
NOTE
Message Indicator lamp signals are described in the following table.
Message Indicator Lamp Signal
Rapidly flashing
Slowly flashing
On
Off

Programmable Buttons

Most of the buttons on your telephone are preprogrammed by the system administrator;
however, you can program some of the telephone buttons for quick access to features or
speed-dial entries. See "Using Programmable Buttons" on

Dialpad Buttons

Use the dialpad buttons to dial phone numbers, enter feature codes, and to enter characters
when using features that require text input.

Speaker

The speaker provides audio for handsfree calls and background music. See "Using Handsfree
Mode" on
on page 10
Page 4
page 53.
By default, the Message Indicator lamp is lit when you receive new messages.
However, this lamp can be programmed for other functions. Contact your system
administrator for more information.
page 29 for information about handsfree calls. See "Listening to Background Music"
for more information about background music.
Description
You have an incoming call.
You have a waiting message or callback message.
You are on a call or using a feature.
Your telephone is idle.
page 13
Mitel ® 8520 Telephone User Guide – Release 6.2, June 2016
for instructions.