Mitel 6867i Administrator's Manual page 63

Advanced Settings (Applicable to Administrator Only)
The Advanced Settings section provides the following options:
HEADING
Network
Global SIP
Line N
(where N = line number)
Action URI
Configuration Server
Firmware Update
TLS Support
802.1x Support
Troubleshooting
DESCRIPTION
Allows you to set Basic Network Settings, Advanced Network Settings,
HTTPS Settings, Type of Service DSCP, and VLAN settings.
Allows you to set global Basic SIP Authentication Settings, Basic SIP
Network Settings, Advanced SIP Settings, Real-time Transport Protocol
(RTP) settings, Codec Preference List Settings, and Autodial Settings that
apply to all lines on the IP phone.
Allows you to set per-line Basic SIP Authentication Settings, Basic SIP
Network Settings, Advanced SIP Settings, Real-time Transport Protocol
(RTP) settings, and Autodial Settings that apply to specific lines on the IP
phone.
Allows an administrator to specify a uniform resource identifier (URI) that
triggers a GET when certain events occur. An Administrator can also
specify a URI to be called, enable polling for the URI, and specify the
interval between polls.
(Applicable to Administrator Only)
Allows you to set the protocol to use on the configuration server (TFTP
(default), FTP, HTTP, or HTTPS), configure automatic firmware and
configuration file updates, enable/disable auto-resync, and assign an XML
push server list.
(Applicable to Administrator Only)
Allows you to manually perform a firmware update on the IP phone from
the configuration server using any of the IP Phones supported protocols.
(Applicable to Administrator Only)
Allows you to specify SIP Root and Intermediate Certificate files, local
certificate files, private key filename, and/or trusted certificate filename to
use when the phone uses the TLS transport protocol to setup a call.
(Applicable to Administrator Only)
Allows you to enable/disable the 802.1x Protocol (Extensible
Authentication Protocol (EAP)) to use on the IP phones for authentication
purposes. Applicable choices are EAP-MD5 or EAP-TLS.
(Applicable to Administrator Only)
Allows you to perform troubleshooting tasks whereby the results can be
forwarded to Mitel Technical Support for analyzing and troubleshooting.
Also displays system messages and error messages if applicable.
Note: You can also specify whether a user can upload system information
automatically or manually by configuring a parameter in the configuration
files. For more information on this feature, see Chapter 9, the
"Configuration and Crash File Retrieval"
section
(Applicable to Administrator Only)
2-12
Configuration Methods
on page 9-16.