Using Live Dialpad (Single-Digit Dialing); Changing The Pin; Enter The Display Text For The Idle State - Mitel 6940 User Manual

C 5
HAPTER

Using Live Dialpad (single-digit dialing)

Activates or deactivates the Live Dialpad. This local function is not supported by the MiVoice Office 400
communication system.

Changing the PIN

You want to change the PIN used to lock/unlock your phone and to thus protect your phone settings (more
information about locking/unlocking your phone can be found in chapter
The digit combination "0000" is set as default. You can select any 2 to 8 digit combination for your new
PIN. The PIN on your phone is changed using the Self Service Portal only. For more information about
the Self Service Portal, please refer to
N :
OTES
• The PIN that you have changed locally on your phone cannot be displayed or overwritten over the
Self Service Portal. Therefore, only configure your PIN via the Self Service Portal of the MiVoice
Office 400 communication server.
• Please note that your personal PIN is valid for all your phones in the one number user concept (see
chapter "One number user

Enter the display text for the idle state

You want to change the text displayed by your phone in the idle state.
The display text shown in the idle state on your phone is configured using the Self Service Portal. For
more information about the Self Service Portal, please refer to
Press Time/Date.
Settings:
Press Settings.
Select the setting you want and confirm with the
Save softkey.
Setting the time zone:
Press Time Zone.
Select the setting you want and confirm with the
Save softkey.
Set Date and Time:
Press Set Date and Time.
Select the setting you want and confirm with the
Save softkey.
"MiVoice Office 400 Self Service
concept").
C
ONFIGURING GENERAL PHONE SETTINGS
P
ERSONALIZING YOUR PHONE
"Locking/Unlocking your
Portal".
"MiVoice Office 400 Self Service
phone").
Portal".
90