Gestetner B070 Service Manual page 1153

BULLETIN NUMBER:
APPLICABLE MODEL:
GESTETNER – 9002/10512
LANIER – LD090/LD0105
RICOH – AFICIO 2090/2105
SAVIN – 4090/40105
SUBJECT: ENHANCED FIRMWARE UPDATE REMARKS
IMPORTANT NOTES REGARDING FIRMWARE UPGRADE FOR THE OLDER
B070/B070 TO THE B070/B071 ENHANCED VERSION:
As described in Technical Service Bulletin B070/B071-035; the B070/B071 enhanced version copier is an
updated version of the older B070/B071 model. The B070/B071 enhanced model utilizes the following
updated firmware levels listed in the table below.
This enhanced firmware is the latest and can be uses on all new and older B070/B071 models. Any future
firmware updates on this model will be based on this enhanced firmware.
The B070/B071 Enhanced Firmware is available on the TSC Web Site.
IMPORTANT STEPS:
When updating an older B070/B071 field machine to the current B070/B071 enhanced version firmware, all
of the following firmware levels need to be upgraded as a set.
Use the following procedure to update to the firmware to the current B070/B071 Enhanced Version:
1. First, install the "System" firmware only.
2. After successfully installing the "System" firmware, turn the machine main power Off/On and confirm that
the machine boots up normally to Ready Condition.
3. Install the remaining firmware simultaneously.
Change the values for SP5165-001 to 008 to 2.5mm
Software
System
NCS (NIB)
Websystem
Webdocbox
Language
BCU (Engine)
Printer
Scanner
Copyright  2004 RICOH Corporation. All rights reserved.
CÓPIA NÃO CONTROLADA
TECHNICAL SERVICE BULLETIN
B070/B071 - 037
Firmware for the B070/B071 Enhanced Version
Software P/N
Netfile
LCDC B0705374B
B0705350B
B0705254D
CÓPIA NÃO CONTROLADA
B0705774
B0705775
B0705776
B0705777
B0705778
B5806516
B5806521
06/09/2004
Version
V5.04.2
V4.51
V4.00
V2.04
V2.03
V2.18
V3.10
V5.14:34
V2.07
V3.02
Page 1 of 1