Post Installation Testing; Changing Web Interface Security; Recommended Modem Settings - Nortel Meridian Meridian 1 Installation Manual

Page 50 of 60 Configuring the software

Post installation testing

Changing web interface security

Recommended modem settings

P0989045 Standard 1.0 May 2002
To ensure the DECT Messaging System is working correctly, perform the
following tests:
1 Send a message from one handset to another.
2 Send a message from the DECT Messaging System Web Interface to one
handset.
3 Send a message from the DECT Messaging System Web Interface to the
group of handsets.
4 From another machine on the same network, telnet onto the machine
using the dect.snpp.port property specified in the
$DECT/properties/DECT.properties file. Send a paging request to the
handset and make sure it is delivered successfully.
5 If configured and installed, send the appropriate TAP command to a
handset and ensure the message is delivered successfully to the handset.
To change the username and password for the DECT Messaging System
administrator, follow the steps in Procedure 8:
Procedure 8
Change the username and password for the Administrator
1 Open the $JBOSS_HOME\tomcat\conf\tomcat-users.xml file using
Notepad.
2 Change the username and password tags to the required settings.
3 Save and close the file to confirm the username and password update.
—————————— End of Procedure ——————————
Set up the modem as specified in the MSDECT.properties file. Procedure 9
on page 51 provides the recommended modem settings: