Creating An Appletalk Zone Filter - Avaya Cajun P882 User Manual

Chapter 15
Using the CLI

Creating an AppleTalk Zone Filter

Using the Web
Agent
15-20
To add interfaces to an NBP filter using the CLI, enter the following
command from Interface mode:
(config-if <interface-name>:)# appletalk access-
list <access-list-number> <permit | deny> nbp
<string>
To delete interfaces to an NBP filter using the CLI, enter the
following command from Configure mode:
> (config-if <interface-name>:)# no appletalk
access-list <access-list-number> <permit | deny>
nbp <string>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
You can create an AppleTalk Zone Filter using either the Web Agent
or the CLI.
To create an AppleTalk zone filter using the Web Agent:
1. Select Zone Filter from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Zone Filter dialog box opens
(Figure 15-17).
Figure 15-17. AppleTalk Zone Filter Dialog Box
2. Select CREATE. The Add AppleTalk Zone Filter dialog
box opens (see Figure 15-18).
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1