Displaying The Diffserv Table; Displaying The Qos Settings For A Physical Port - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Displaying the DiffServ Table

Use the show diffserv table command to display the priority that

is assigned to each DSCP.

The syntax of the command is:

Avaya>show diffserv table

* Note: The show diffserv table CLI command displays the

packet loss probability (PLP) for each DSCP. However,

the switch does not currently support PLP.

Use the show port command to display the QoS settings for a

physical port. This command displays the priority of the port, if the

port is set to ignore 802.1p tag priority, and if the port is set to use

the DSCP for bridged IP traffic.

The syntax of the command is:

Avaya>show port [{<mod-num> | <mod-swport-range>} [...,{<mod-

num> | <mod-swport-range>}]]

Table 21-13. Keywords, Arguments, and Options

Keyword, Argument

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

The slot number of a module. If you

specify <mod-num>, the switch displays

the QoS settings for all ports on the

module in the slot that you specify.

P550r P580 P880