Creating A Vlan; Using The Web Agent - Avaya Cajun P882 User Manual

Chapter 4

Creating a VLAN

CAUTION

Using the Web Agent

4-8
Assigning one of the ports of a 48-port module to a VLAN for
which there exists IP interface will force that interface to be in
the UP state, even when there is no physical connection to the
module.
You can create a VLAN using either the web agent or the CLI.
Before creating or adding additional VLANS, it is strongly
recommended that you review the contents of Chapter 4,
"Using VLANs, Spanning Tree, Hunt Groups, and VTP
Snooping," and Chapter 6,
Forwarding Table."
To create a VLAN:
1. Select Configuration from the L2 Switching > VLANs
folder on the Web Agent window. The VLAN
Configuration dialog box opens (Figure 4-3).
Figure 4-3. VLAN Configuration Dialog Box
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
"Managing the Address