Chapter 4
Configuring Spanning Tree Protocol Ports
Using the Web
Agent
4-20
You can configure the bridge ports for Spanning Tree using either
the Web Agent or the CLI.
To configure spanning tree bridge ports using the Web Agent:
1. Select Spanning Tree from the L2 Switching folder on the
Web Agent window. The Spanning Tree Information
window opens (Figure 4-9).
2. Select the port number listed in the Bridge Ports column.
The Spanning Tree Per Module Bridge Port
Information window opens (Figure 4-11).
Figure 4-9. Spanning Tree Per Module Bridge Port Dialog Box
3. Select the Bridge Port number from the Bridge Ports
column. The Spanning Tree Bridge Port Information
window opens (Figure 4-12).
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1