Chapter 12
CLI Command
Deleting IPX Static Service
Web Agent
Procedure
CLI Command
12-16
Figure 12-11. IPX Static Services Dialog Box
To create IPX static services using the CLI, enter the following
command in Configure mode:
<configure># ipx service <service-type type
|range>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
You can delete an IPX static service using either the Web Agent or
the CLI.
To delete an IPX static service using the Web Agent:
1. Select Static Services from the Routing > IPX >
Configuration group on the Web Agent window. The IPX
Static Services dialog box opens (see Figure 12-9).
2. Select the checkbox for the IPX Static Service that you want
to remove.
3. Click DELETE to remove the IPX static service, or CANCEL
to keep the IPX Static Service.
To delete an IPX static service using the CLI, enter the following
command in Configuration mode:
(configure)# clear ipx service {<service-type>
<service-name>|*}
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1