Avaya Cajun P882 User Manual page 220

Chapter 5
5-42
2. Enter the following command:
<configure># set port network-error-detection {<mod-
port-range> | <all>} [action {notify | disable-port | off}]
[rising-threshold <rising-threshold-value>] [falling-
threshold <falling-threshold-value>] [interval
<interval-seconds>]
Table 5-10 explains the keywords, arguments, and options for the
set port network-error-detection command:.
Table 5-10. Keywords, Arguments, and Options
Keywords,
Arguments and
Options
<mod/port-range>
all
action {notify | disable-
port | off}
<rising-threshold value>
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1
Explanation
The slot number of the module, and, either
port number, or range of port numbers.
Enter the port ranges in the format
For example:
• To specify port 1 on the module in slot
3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
Disables NEDR on all ports on all modules in
the switch. all can be used only with off.
Action that NEDR performs when the rate
of errors exceeds the threshold. The options
are:
notify - Logs the event in the event log
disable-port - Disables the port and logs
the event in the event log.
Note:
A port will be disabled if the rate of
errors equals or exceeds the
threshold. Make sure a redundant
protocol is configured.
off - Disables NEDR on the port or ports that
you specify.
The default setting is notify.
The rising threshold.
The number of CRC errors that triggers
NEDR to log an event in the event log or
disable the port. The default setting is 100
(minimum is 1; maximum is 65535).
Px Py
- .
1 of 2