Avaya Cajun P882 User Manual page 212

Chapter 5
CLI Commands
5-34
2. Select the Configuration Web page.
3. In the Module Information pane, click the port link in the
Switch Port column that you want to enable auto-flush for.
4. On the Switch Ports Web page, click either the port link in the
Name column that you want to enable auto-flush for, or
5. Click the All Module Switch Ports Configuration link if you
want to enable auto-flush for all ports within the module.
6. Select enable from the Auto Flush on Link Down pull-down
menu on the Switch Port Configuration page.
7. Click Apply to save changes, or Cancel to exit the Web page
without saving your changes.
Figure 5-9. Switch Port Configuration Web page
Use the following command to enable Auto Flush on link down:
set port auto-flush <module-number>/<mod-swport-range> enable
Use the following command to disable Auto Flush on link down:
set port auto-flush <module-number>/<mod-swport-range> disable
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1