Avaya Cajun P882 User Manual page 308

Chapter 9
Parameter
TCP/UDP Source Port
TCP/UDP Destination
Port
TCP Established
9-26
Table 9-4. IP Extended Access Rule Creation Parameters
Allows you to...
Specify a range of source ports that pass between two hosts or
switches using the Transmission Control Protocol (TCP) or the
User Datagram Protocol (UDP). Options include:
• Min. - The lowest numbered port in the range. The
default is 0.
• Max. - The highest numbered port in the range. The
default is 65,535.
* Note: The protocol ID parameter must first be
To see the complete list of well-known port numbers
(specifically in relation to the destination port), refer to the
URL:http://www.iana.org/assignments/port-numbers
Specify a range of destination ports that pass data between
two hosts or switches using the Transmission Control Protocol
(TCP) or the User Datagram Protocol (UDP). Options include:
• Min. - The lowest numbered port in the range. The
default is 0.
• Max. - The highest numbered port in the range. The
default is 65,535.
* Note: The protocol ID parameter must first be
To see the complete list of well-known port numbers
(specifically in relation to the destination port), refer to the
URL:http://www.isi.edu/in-notes/iana/assignments/port-
numbers
Criteria for matching TCP packets of established (connected)
or not established (initial call) sessions.
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
configured with either 6 for TCP or 17 for
UDP, to enable the TCP/UDP Source port
parameter.
configured with either 6 for TCP or 17 for
UDP, to enable the TCP/UDP Destination
port parameter.
2 of 2