Avaya Cajun P882 User Manual page 660

Chapter 21
21-26
Table 21-14. Keywords, Arguments, and Options
Keyword, Argument
or Option
[{lt <port> | eq <port> | gt
<port> | range <port>
<port>}]
<dest-ip-addr>
<dest-wildcard>
any
host <dest-ip-addr>
[{lt <port> | eq <port> | gt
<port> | range <port>
<port>}]
[established]
* Note: You must use the CLI to set up ACLs for QoS. Do not
attempt to use the IP Access Control Web page in the Web
Agent to set up ACLs for QoS.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Definition
A source port or range of source ports
that pass between two hosts or switches
using the Transmission Control Protocol
(TCP) or the User Datagram Protocol
(UDP).
The destination IP address of the subnet
that you want to assign a priority to.
The inverse of a network mask. Enter a
32-bit number in four-part, dotted
decimal format. Place ones in the bit
positions that you want to mask.
This parameter specifies a range of IP
address. For example, to specify all IP
addresses in the 10.10.70 subnet, enter
10.10.70.0 0.0.0.255.
A destination of 0.0.0.0 and a
destination-wildcard of 255.255.255.255
The destination IP address that you want
to assign a priority to.
A destination port or range of destination
ports that pass data between two hosts or
switches using the Transmission Control
Protocol (TCP) or the User Datagram
Protocol (UDP).
Permits TCP connections to be
established that match the rule.
3 of 3