Avaya Cajun P882 User Manual page 401
Multiservice switch
Hide thumbs
Also See for Cajun P882:
- User manual (782 pages) ,
- Command reference manual (764 pages) ,
- Cli reference manual (617 pages)
Table of Contents
Advertisement
Parameter
Split Horizon
Default
Metric
Default
Route
Auth Type
Auth Key
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide,v5.3.1
Table 10-2. RIP Interface Dialog Box Parameters
Allows you to...
Specify that IP routes learned from an immediate neighbor are not
advertised back to the neighbor from which the routes were
learned.Selections include:
• Split Horizon - Routes that leave this interface, will not be
advertised back on the same interface.
• Split Horizon with Poison Reverse - Routes that leave this
interface, will be advertised back on the same interface with an
infinite metric (16). Split Horizon with Poison Reverse is
the default setting.
Specify the RIP route metric value. Costing metric used when
advertising the RIP route on this interface.
1 is the default setting. The parameter range is 0-15.
Specify the mode for the default route learning on this interface.
Different states include:
• Disable - Disables the default route.
• Talk Only - Send RIP information to the network.
• Listen Only - Receive RIP information from the network.
• Talk/Listen - Both send and receive RIP information from the
network.
Disable is the default setting.
Specify the type of authentication available for use on a given RIP
interface. Authentication types include:
• None - No authentication required.
• Simple - Uses a clear-text password for validation. This
password is sent unencrypted across the network to neighboring
RIP routers.Available for RIP V2 only.
• MD5 - Uses an encrypted Key to validate RIP V2 routing
updates from neighboring RIP V2 routers.
None is the default setting
If Auth Type is:
• None - leave this field blank, or this field is ignored.
• Simple - Enter the clear-text password for validating RIP
packets from neighbor RIP V2 routers.(1-16 characters)
• MD5 - Enter the defined Key Chain values under Routing -> IP-
> RIP -> Key Chains.
None is the default setting.
3. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Configuring RIP Routing
2 of 2
10-5
Advertisement
Table of Contents
