Configuring The Avaya Switch As An Ipx Router; Hardware Requirements - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Configuring the Avaya Switch as an IPX Router

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

Table 12-1. IPX Datagram Structure Fields continued

Indicates the type of service required or offered by

the packet. Types include:

The IPX network address of the destination

The MAC address of the destination node.

Address of the process running in the destination

node. Sockets route packets to different processes

within the same node.

Source Network

The network address of the source network.

The MAC address of the source node.

Source Socket

Address of the process running in the source

You can configure the Avaya P550R/P580/P880/P882 Multiservice

switch as an IPX router. Specific hardware is required to accomplish

this configuration.

To configure your switch as an IPX router, your Avaya P550R/P580/

P880/P882 Multiservice switch must be configured with the

following hardware:

50 Series Layer 3 supervisor module

Layer 3 50 series media modules.

80-Series Supervisor Modules

80-Series Licensed Layer 3 media modules

• Sequenced Packet Exchange (SPX packet)

• NetWare Core Protocol (NCP packet)

• NetBIOS (propagated packet)

Configuring IPX Routing

P550r P580 P880