Chapter 5
5-12
Figure 5-2. Physical Port Configuration Dialog Box for the
Gigabit Ethernet Module
3. Click the checkbox in the Enable column to enable a port. A
check mark displays.
*Note: If the port is already enabled (check mark is
visible), and you want to disable the port, click the
box to Disable the port (check mark vanishes).
4. Click APPLY to save your settings, or CANCEL to restore
previous settings.
5. Select the port name from the Name field. The Detailed
Physical Port Configuration dialog box opens (Figure 5-3
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1