Avaya Cajun P882 User Manual page 400

Chapter 10
Parameter
Select
Interface
Network
Address
Mode
Send Version
Receive
Version
10-4
Figure 10-2. RIP Interfaces Dialog Box
2. Refer to Table 10-2 to modify the RIP interfaces dialog box
parameters:
Table 10-2. RIP Interface Dialog Box Parameters
Allows you to...
Select the RIP interface to be modified.
Displays an interface from a list of interfaces that you previously
configured.
Displays an IP address to be associated with the displayed interface.
Specify the RIP State. Different states include:
• talk only (only send RIP information on this interface)
• listen only (only receive RIP information on this interface)
• talk/listen (both send and receive RIP information on this
interface)
Talk/Listen is the default setting.
Specify the version of RIP you want to use to send packets across this
interface. Selections include:
• V1
• V2
• V1/V2
V1 is the default setting
Specify the version of RIP you want to use to receive packets.
Selections include:
• V1
• V2
• V1/V2
V1 is the default setting
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide,v5.3.1
1 of 2