Setting Up Policing - Avaya Cajun P882 User Manual

Chapter 21

Setting Up Policing

21-32
source port or mirror port are dropped, the mirror traffic
may not match the source traffic.
Use the set port police command to enable or disable policing for
ingress traffic on a port. For information on how policing works, see
"Ingress Policing" on page 31.
The syntax for this command is:
Avaya <configure># set port police {{<mod-num> | <mod-swport-
range>} [..., {<mod-num> | <mod-swport-range>}] | all-ports}
queue <queue> {bit-rate <rate> normal-burst <normal-burst> |
disable}
Table 21-18. Keywords, Arguments, and Options
Keyword, Argument
or Option
<mod-num>
<mod-swport-range>
all-ports
<queue>
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Definition
The slot number of a module. If you
specify <mod-num>, policing is enabled
for all ports on the module in the slot
that you specify.
The slot number of a module, and, either
a port number, or a range of port
numbers having the format Px-Py. For
example:
• To specify port 1 on the module in
slot 3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify <mod-swport-range>,
policing is enabled for the port or range
of ports on the module in the slot that
you specify.
All ports in the chassis. If you specify all-
ports, policing is enabled on all modules
in the chassis.
The queue number, which can range
from 0 to 7.
1 of 2