Comparing Observed Arp Data; Clearing The Arp Cache; Deleting Specific Arp Cache Entries; Creating Static Arp Entries - Avaya Virtual Services Platform 7000 Series Troubleshooting Manual

Troubleshooting Layer 3
• ipNetToMediaType

Comparing observed ARP data

Compare displayed ARP data for possible inconsistencies.
Procedure
1. Compare ARP data displayed using ACLI, EDM, and SNMP walk.
2. Note any inconsistencies.

Clearing the ARP cache

You can completely clear all static and dynamic ARP cache entries.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. Use the clear arp-cache command to clear the ARP cache entries.

Deleting specific ARP cache entries

You can delete one or more specific entries from the ARP cache table if required.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Enter the no ip arp <A.B.C.D> command to delete an entry.
3. Repeat step 2 for other entries as required.

Creating static ARP entries

You can create one or more new static entries in the ARP cache table.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
Troubleshooting Avaya VSP 7000 Series
72
Comments on this document? infodev@avaya.com
July 2015