Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
To check the temperature status and configure thresholds from the
Web Agent:
1. Select Temperature system from the System >
Configuration group on the Web Agent windows. The
Temperature System dialog box (Figure 17-1) opens.
Figure 17-1. Temperature System Dialog Box (M5500-SupA,
* Note: The P880 does not display the current temperature of
the backplane. In the Current Temperature field, the
switch displays --.
If a redundant Supervisor module is installed, the Slot 2
Sensor column displays.
You cannot change settings for the backplane
temperature sensors on the P880. If you attempt to
change the settings, the switch displays the following
error message:
Set Limits for Backplane Sensor failed -
failure writing to sensor
Monitoring the Avaya Multiservice Switch
M550R, M880R)
17-3