Avaya Cajun P882 User Manual page 616

Chapter 19
19-16
Table 19-4. Port Ranges for Fabric Mode 2 Port Mirroring
Module
48-port 10/100 modules
3. Select the Channel and the associated port from the Source
Port column pull-down menu.
4. In the Mirror Port column pull-down menu, select the port
to which you want to mirror traffic.
Both the source port and mirror port must either:
Be on the same VLAN and have the same VLAN binding
—
or
Have VLAN binding set to bind to all
—
The source port and the mirror port must be different
physical ports.
5. In the Direction/Filter column, select the direction of traffic
that you want to mirror and the filter that you want to set up,
if any.
You can set up a MAC address filter to monitor only traffic
with a specific source MAC address or destination MAC
address.
* Note: Do not set the source MAC address in the Destination/
Filter field.Setting a Source MAC address in the
Destination MAC filter causes traffic to be improperly
monitored.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Port ranges that you can mirror
• 1–12 — any 1 port or the entire
range.
• 13–24 — any 1 port or the entire
range.
• 25–36 — any 1 port or the entire
range.
• 37–48 — any 1 port or the entire
range.
If you mirror a single port, you can
mirror only 1 port per range at a time.
Example: You can mirror port 1 on
channel 1 and port 13 on channel 2
simultaneously. However, you cannot
mirror port 1 on channel 1 and port 2
on channel 2 simultaneously.
2 of 2