Chapter 12
Deleting IPX Static Routes
Web Agent
Procedure
CLI Command
Modifying IPX Static Routes
Web Agent
Procedure
12-12
You can delete an IPX static route using either the Web Agent or the
CLI.
To delete an IPX static route using the Web Agent:
1. Select Static Routes from the Routing > IPX >
Configuration group on the Web Agent window. The IPX
Static Routes dialog box opens (see Figure 12-8).
2. Select the checkbox for the IPX static route that you want to
delete from the Select column.
3. Click DELETE to remove the IPX static route, or CANCEL to
restore the IPX static route.
To delete an IPX static route using the CLI, enter the following
command from Configure mode:
(configure)# clear ipx route {<network>
default|*}
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
You can modify IPX static routes form either the Web Agent or the
CLI.
To modify an IPX static route using the Web Agent:
1. Select Static Routes from the Routing > IPX >
Configuration group on the Web Agent window. The IPX
Static Routes dialog box opens (see Figure 12-7).
2. Select the checkbox for the IPX static route that you want to
modify from the Select column.
3. Refer to Table 12-4 to modify the IPX Static Route
configuration.
4. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1