Configuring Physical Port Parameters on Gigabit Ports
Web Agent
Procedure
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1
You can configure the physical port parameters on Gigabit ports
using either the Web Agent or the CLI.
To configure ports on a gigabit module using the Web Agent:
1. Select Configuration from the Modules & Ports group on
the Web Agent window. The Module Information dialog box
opens (Figure 5-1).
Figure 5-1. Module Information Dialog Box
2. Select the port from the Ports column for the Gigabit module
that you want to configure. The Physical Port Configuration
dialog box for that module opens (Figure 5-2).
Configuring Port Parameters
5-11