Avaya Cajun P882 User Manual page 414

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Figure 11-3. ADD OSPF Area Dialog Box

3. Refer to Table 11-2 to configure the Add OSPF Area dialog

box parameters:

Table 11-2. Add OSPF Area Dialog Box Parameters

Allows you to...

Specify the Area ID (32-bit character) for the new area.

This must be a unique ID within AS.

Select the type of area. Types include:

• Non-Stub - Non-edge device/router.

• Stub - An edge device/router that does not leak

external advertisements.

• Not-so-stubby - This is still a stub area, however,

this device/router can leak some external

advertisements.

Enable or Disable the translation of the NSSA ASE Type

7 into an AS External LSA Type 5.

Specify the stub area default summary cost metric.

(Default is 1).

Select to enable or disable the Type 3 summary LSA filter

for Stub and NSSA only.

4. Click CREATE to save your changes, or CANCEL to restore

previous settings.

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1

Do not use 0.0.0.0 as an area ID.

P550r P580 P880