Avaya Cajun P882 User Manual page 492

Chapter 14
14-10
Table 14-3. Add IPX SAP Network Filter Dialog Box Parameters
Parameter Allows you to...
Type Specify the service type (in hex) that identifies the type of
service the server provides. Well-known service types
include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
• NetWare Directory Services (278)
A value of ffff matches all service type values.
Direction Select the direction of the filter in question. Filter choices
include:
• Inbound - Applies the filter only to SAP packets
received on the interface.
• Outbound - Applies the filter only to SAP packets
sent on the interface.
• Both - Applies the filter to SAP packets both sent
and received on the interface
Default value is outbound.
Filter/ Disable whether the services matching Net and Type are
Suppress filtered (inbound) or suppressed (outbound).
• Filtered - Applies the filter only to SAP packets
received (inbound direction) on the interface.
• Suppressed - Applies the filter only to SAP packets
sent (outbound direction) on the interface.
Select Disable to disable the filtering and suppression of
traffic. The default is Enable.
Hops Specify the number of routers (hops) that the packet must
pass through before reaching the service(s) matched by
the filter. This entry is used to override the value in the
SAP packet.
Entering 0 ensures that there is no override in the
transmission of data on the network.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
2 of 2