Setting One-Time Summer Time Hours - Avaya Cajun P882 User Manual

Chapter 3

Setting One-Time Summer Time Hours

Web Agent
Procedure
3-10
You can set one-time summer time hours using either the Web
Agent or the CLI.
To set Summer Time Hours that are not based on a standard rule
using the Web Agent:
1. Select System Clock from the System> Configuration group
on the Web Agent window. The System Clock dialog box
opens (Figure 3-4).
2. Select Summer Time Hours Algorithm from the Clock
Options field. The Summer Time Hours Configuration
window opens (Figure 3-5).
3. Select Enable from the Enable State pull-down menu. The
default is Disable.
4. Enter the reset value for the clock in minutes in the Offset
field. For example, if you intend to reset the clock forward or
backward by one hour, keep the default value of 60 minutes.
5. Select the check box next to the One-Time field to set the
date and time for Summer Time Hours on a one-time basis:
a. Enter the specific Month, Day, and Year when the Summer
Time Hours start and end.
b. Enter the Hour and Minutes when the Summer Time
Hours start and end.
6. Click APPLY to save your changes, or CANCEL to clear your
selection.
Refer to Table 3-2 for detailed information about the One-Time field
parameters for the Summer Time Hours Configuration dialog box.
Table 3-2. One-Time Summer Time Hours Configuration
Parameter Definition
One-time Select if Summer Time Hours change one time, such as on
a specified date.
When you select one-time Summer Time Hours, you
indicate the time and date on which Summer Time Hours
begin and end.
Start Specifies the start of Summer Time Hours.
End Specifies the end of Summer Time Hours.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1