Deleting Static Client Ports - Avaya Cajun P882 User Manual

Using the CLI

Deleting Static Client Ports

Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
2. Select the number from the Static Client Ports column. The
Static Multicast Sessions Client Ports dialog box opens
(Figure 16-10).
Figure 16-10. Static Multicast Sessions Clients Port Dialog Box
3. Enter the new port number to be added in the Port field,.
4. Click Add Client Port. The new port is added.
To create a static client port using the CLI, enter the following
command from Configure mode:
(configure)# set intelligent-multicast static-
client-port <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Static client ports can be deleted from either the Web or the CLI.
To delete static client ports using the Web Agent:
1. Select Static Sessions from L2 > Intelligent Multicast
group on the Web Agent window. The Static Multicast
Sessions dialog box opens (Figure 16-9).
2. Select the number from the Static Client Ports column. The
Static Multicast Sessions Client Ports dialog box opens
(Figure 16-10).
3. Select a port and click DELETE to remove the static client
port, or CANCEL to restore previous settings.
Managing Intelligent Multicasting
16-19