Table 9-8. DVMRP Global Configuration Dialog Box Parameters
Parameter
DVMRP Version 3/xFF
Neighbor Router Probe
Interval
Neighbor Router Timeout
Interval
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Figure 9-19. DVMRP Global Configuration Dialog Box
4. Select Enable from the DVMRP Version 3/0xFF field
pull-down menu.
5. Refer to Table 9-8 to configure the DVMRP Global
Configuration dialog box parameters:
Allows you to...
Select Disable to globally disable DVMRP. The default
value is Enable.
Enter probe interval (in seconds) for the switch to
probe the network for available neighbor routers.
Enter the time-out interval (in seconds) that a
neighbor stays up without confirmation. This is an
important method used to time-out old routes.
Configuring IP Routing
1 of 2
9-55