Avaya Cajun P882 User Manual page 510

Chapter 15
Using the CLI
15-14
Figure 15-11. Edit AppleTalk Zone.
3. If you need to add a new zone, enter the new AppleTalk zone
name and click Add in the Add text field. If you need to
delete a zone(s), place a check in the Select column next to
the zone you need to delete then click the DELETE button.
4. Navigate back the AppleTalk Static Route dialog box by
selecting Static Route from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Static Route dialog box opens
(Figure 15-8).Select the AppleTalk Static Route that you
want to edit from the Select column.
5. Enter the new network range start number in the Network
Range Start field.
6. Enter the new network range end number in the Network
Range End field.
7. Enter the new network number of the next hop for the static
route in the Network Number field.
8. Enter the new node number of the next hop for the static
route in the Node field.
9. Enter the type to be associated with the static route in the
Type field.
10. Click APPLY to save the new zone.
To edit an AppleTalk static route using the CLI, enter the following
command from Interface mode:
(config if-:<interface-name>)# appletalk static
cable-range <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1