Enabling The Lgmp Client - Avaya Cajun P882 User Manual

Table 16-11. LGMP Client Configuration Dialog Box Parameters
Parameter
LGMP Message
Reception
Statistics
Intelligent
Multicast
Session
Statistics

Enabling the LGMP Client

Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Definition
• Report - Displays the number of LGMP
report messages received.
• Leave - Displays the number of LGMP leave
messages received.
• End Session - Displays the number of
LGMP end session messages received.
• Router Report - Displays the number of
LGMP router report messages received.
• Router Leave - Displays the number of
LGMP router leaves messages received.
• Invalid - Displays the number of LGMP
messages received with an invalid payload.
• New Client Ports Added - Displays the
number of new clients added by LGMP.
• Existing Client Ports Removed - Displays
the number of clients removed by LGMP.
• Existing Sessions Removed - Displays the
number of sessions removed by LGMP.
• New Router Ports Added - Displays the
number of new routers added by LGMP.
• Existing Router Ports Removed -
Displays the number of new routers
removed by LGMP.
You can enable the LGMP client statistics using either the Web
Agent or the CLI.
To enable an LGMP client using the Web Agent:
1. Select LGMP Client from the L2 > Intelligent Multicast
group on the Web Agent window. The LGMP Client
Configuration dialog box opens (Figure 16-14).
*Note: You must enable intelligent multicasting on a
global basis to activate LGMP client configuration.
2. Select Enable from the State field pull-down menu, if it is not
already displayed.
Managing Intelligent Multicasting
2 of 2
16-31