Viewing The Lgmp Server Statistics - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Using the CLI

Viewing the LGMP Server Statistics

Using the Web

Using the CLI

2. Refer to Table to configure the LGMP Server

Configuration dialog box parameters.

APPLY to save your changes.

CANCEL to restore previous settings.

To configure the LGMP server using the CLI, enter the following

command from Configure mode:

<configure># set lgmp server <options>

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, v5.3.1 for details about this command.

You can view the LGMP server statistics using either the Web Agent

To enable/view the LGMP server using the Web Agent:

1. Select LGMP Snooping from the L2 > Intelligent

Multicast group on the Web Agent window. The LGMP

Server Configuration dialog box opens (Figure 16-12).

2. Select Enable from the State field, if it is not already

3. Click CLEAR to clear the statistics or REFRESH to refresh

the contents of the table.

To view the LGMP server statistics using the CLI, enter the following

command from Configure mode:

<configure># show lgmp server statistics

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, v5.3.1 for details about this command.

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

P550r P580 P880