Avaya Cajun P882 User Manual page 65

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
6. Complete the following steps to change the command mode
to the configure mode:
a. Enter the enable command.
b. Enter the configure command.
7. Enter the setup command. This initiates a series of queries.
Answer each query as follows:
a. Press Enter when prompted to change the super user
password. This accepts the default of Yes
b. Enter your old password. The system then prompts you
for a new password.
c. Enter your new password, then re-enter the new
password to verify your choice.
d. Enter the IP address for the switch manager's Ethernet
console.
e. Enter the subnet mask.
f. Enter the default gateway for the switch.
The following is a sample output of the Setup command to change
or modify the Supervisor's Ethernet Console's IP address, subnet
mask, default gateway or changing the super user password.
Welcome to Switch Setup. The brief series of questions that follows
will help you to configure this switch. After completing this process,
you will be able to manage the switch using:
- the switch-based HTTP server
- the Element Management System.
Text in [] is the default answer for each questions.
To accept the default, press ENTER.
Would you like to change the super user password [Yes]? Y
Old Password: xxxx
New Password: xxxx
Re-type New Password: xxxx
Initialize and Setup
2-7