Creating And Modifying Ipx Rip Filters - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Creating and Modifying IPX RIP Filters

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

3. Click APPLY to save your changes, or CANCEL to restore

previous settings.

To configure IPX RIP interfaces using the CLI, enter the following

command in Interface mode:

(config-if: <if name>):# ipx rip

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, Version 5.3.1 for details about this

You can create and modify IPX RIP filters from either the Web Agent

To create and modify IPX RIP filters using the Web Agent:

1. Select Filters from the Routing > IPX > RIP group on the

Web Agent window. The IPX RIP Filters dialog box opens

(Figure 13-2). Only the CREATE button is displayed when

no filters are configured.

Figure 13-2. IPX RIP Filters Dialog Box

2. Select CREATE to create a new filter. The Add IPX RIP

Filter dialog box opens (Figure 13-3).

Configuring the IPX RIP Protocol

P550r P580 P880