Avaya Cajun P882 User Manual page 508

Chapter 15
15-12
Figure 15-9. Add AppleTalk Static Route Dialog Box
3. Refer to Table 15-2 to configure the Add AppleTalk Static
Route dialog box parameters.
Table 15-2. Add AppleTalk Static Route Dialog Box Parameters
Parameter Definition
Network Range Enter the starting network number. The network
Start number specifies the range of AppleTalk network
numbers for extended networks. Each number in the
range must be an integer between 1 and 65279.
Note:
Network Range Enter the ending network number. The network
End number specifies the range of AppleTalk network
numbers for extended networks. Each number in the
range must be an integer between 1 and 65279.
Network Enter the next hop network number. This number
Number specifies the network number of the next hop router
for the network range.
Node Enter the next hop node identification number. This
number must be between 1 and 253.
Type Select the type of static route. The options include:
Zone Enter an AppleTalk zone name assigned to this route.
Zone names may be up to 32 characters in length.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Network Range Start must be less than or
equal to Network Range End.
• High - The static route is not superseded by a
route update.
• Low - The static route can be superseded by a
route update.