Avaya Cajun P882 User Manual page 248

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Adding Entries

Manually Using

3. Select a VLAN for this entry from the VLAN field pull-down

4. Select Forward or Filter from the Port Binding field

pull-down menu.If filter is selected, frames with the specific

MAC address will be dropped.

5. Enter the port that you want associated with this entry in the

Port Binding field.

6. Select a priority level from the Priority field pull-down menu

for packets that you want forwarded to this MAC address.

High priority addresses move to the front of the switch packet

buffers automatically.

7. Select the persistence of Permanent or Ageout from the

Persistence field pull-down menu.

8. Refer to Table 6-5 for an explanation of the Aging and

Persistence field parameters:

Table 6-5. Entry Persistence

The address is saved in nonvolatile memory and

is not aged out of the table.

Address is cleared from the address forwarding

table when the timeout interval expires. This is

the state of all entries dynamically learned by the

switch. It ensures that MAC addresses that are

not active on the network do not remain in the

switch address forwarding table indefinitely.

9. Click APPLY to save your changes, or CANCEL to clear the

dialog box fields.

To add entries to the AFT manually using the CLI, enter the

following command in Configure mode:

<configure># set aft entry (mac address)

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, Version 5.3.1 for details about this

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1

P550r P580 P880