Deleting Ospf Virtual Links - Avaya Cajun P882 User Manual

Chapter 11
Using the CLI

Deleting OSPF Virtual Links

Using the Web
Agent
11-16
Table 11-4. Add OSPF Virtual Link Dialog Box Parameters continued
Parameter
Dead Interval
Authentication
Authentication
Key
MD5 Key ID
4. Click CREATE to create the virtual link, or CANCEL if you
do not want to create the OSPF virtual link.
To create a OSPF virtual link using the CLI, enter the following
command from Configure mode:
>(configure router: ospf) area <area-id>
virtual-link <router-id>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3 for details about this command.
You can delete OSPF Virtual links using either the Web Agent or the
CLI.
To delete an OSPF virtual link using the Web Agent:
1. Select Virtual Links from the Routing > IP > OSPF group
on the Web Agent window. The OSPF Virtual Links dialog
box opens (Figure 11-5).
2. Select the virtual link that you want to remove.
3. Click DELETE. The virtual link is removed.
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Defines the...
Time in seconds that a router's Hello packets have
not been seen before it's neighbors declare the
router down. This should be some multiple of the
Hello interval. This value must be the same for all
routers attached to a common network.The value
range is 1-65535. The default is 40.
Type of authentication available for use on a given
OSPF interface. Authentication types include:
• None (default)
• Simple Password
• MD5 Authentication
Authentication key for the Area.
MD5 authentication key ID as a decimal value. The
values range is 1-255.