Displaying Existing Ip Interfaces - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Displaying Existing IP Interfaces

Display Existing

IP interfaces

Using the Web

When you create an IP interface, you activate a location in the

switch that communicates between IP and the embedded software

of the switch. You can create an IP interface using either the Web

Agent or the CLI.

To display, modify, delete a previously created IP interfaces or to

create a new IP interface using the Web Agent:

1. Select Interfaces from the Routing > IP > Configuration

group on the Web Agent window. The IP Interfaces dialog

box opens (Figure 9-2- split in three due to size).

Figure 9-2. IP Interfaces Dialog Box

2. To modify an IP interface first click on Select, to select the

specific interface, modify the parameter(s), and then click on

APPLY or CANCEL to restore previous settings.

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

P550r P580 P880