Creating A Static Multicast Session - Avaya Cajun P882 User Manual

Using the CLI

Creating a Static Multicast Session

Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
5. Click DELETE to remove your selected multicast session
client port, or CANCEL to restore previous settings.
* Note: Static (Mgmt) client ports can only be removed through
the Static Sessions dialog box.
To delete a multicast session client port using the CLI, enter the
following command from Configure mode:
<configure># clear intelligent-multicast client-
port <session-id> port <mod-port-spec>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
You can create a static multicast session using either the Web Agent
or the CLI.
To create a new static multicast session using the Web Agent:
1. Select Static Sessions from L2 > Intelligent Multicast
group on the Web Agent window. The Static Multicast
Sessions dialog box opens (Figure 16-7).
*Note: You must enable intelligent multicasting on a
global basis to make your static multicast session
active. See "Configuring Global Intelligent
Multicasting", earlier in this chapter.
Figure 16-7. Static Multicast Session Dialog Box
2. Select Create to create a new session. The Static Multicast
Session Configuration dialog box opens (Figure 16-8).
Managing Intelligent Multicasting
16-15