Configuring Physical Port Parameters On Fast Ethernet Ports - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Configuring Physical Port Parameters on Fast Ethernet Ports

You can configure ports on a Fast Ethernet module using either the

Web Agent or CLI commands.

To configure ports on a Fast Ethernet module using the Web Agent:

1. Select Configuration from Modules & Ports group on the

Web Agent window. The Module Information dialog box

opens (Figure 5-1).

2. Select the checkbox in the Slot column next to the Fast

Ethernet module to change the Name field, if desired, change

the module name then Click the APPLY button.

3. Select the number in the Ports column for the Fast Ethernet

module that you want to configure. The Physical Port

Configuration window opens (Figure 5-4).

Figure 5-4. Physical Port Configuration Window for the Fast

Ethernet Module installed in Slot 3 (partial view)

4. By default the checkbox is checked in the Enable column. To

change the enable remove the check in the checkbox.

5. If you change the enable checkbox Click APPLY to save

your settings, or CANCEL to restore previous settings.

6. Select a port name from the Name field (for example, Port

6.1). The Detailed Physical Port Configuration dialog box

for that port opens (Figure 5-5).

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1

P550r P580 P880