Avaya Cajun P882 User Manual page 588

Chapter 17
Using the CLI
17-18
Table 17-8. Class Column Items
Class
Authentication
Failure
Bridge Status
Switch Fabric
OSPF
RIP
LDAP
AppleTalk
Power Status
Redundant CPU
DVMRP
CLI
SNMP
Unknown MAC
Received
VRRP
6. Click APPLY to save your changes, or CANCEL to restore
previous settings.
To set log size using the CLI, enter the following command from
Configuration mode:
<configure>#set logging history size <128, 512,
1024, 2048>
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Determines whether or not the switch
sends a notification...
When the switch detects an authentication
failure. This is a security-related feature used to
detect unauthorized SNMP activity.
Of changes in bridge status.
Of failures in the switch fabric. These are critical
failures and should be monitored closely.
For OSPF events if OSPF protocol event logging
is enabled.
For RIP events if RIP protocol event logging is
enabled.
For LDAP events if LDAP protocol event logging
is enabled.
For AppleTalk events if AppleTalk protocol
event logging is enabled.
Addition or Removal of a Power Supply
When a redundant Supervisor is used. Message
will indicate changes in Active and Standby
status of the CPU
For DVMRP events, if DVMRP event logging is
enabled.
For CLI events, if CLI event logging is enabled.
For SNMP events, if SNMP protocol event
.
logging is enabled
If an unknown MAC address is received.
For VRRP events, if VRRP protocol event logging
is enabled.
2 of 2