Enabling Iedr For Hunt Groups - Avaya Cajun P882 User Manual

Enabling IEDR for Hunt Groups

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1
1. Enter Global Configuration mode.
The CLI displays the <configure># prompt.
* Note: For information on how to enter this mode, see
"Accessing/Exiting the Command Modes" in
Chapter 1, "Overview," of Command Reference
Guide for the Avaya P550R, P580, P880, and P882
Multiservice Switches, Version 5.3.1.
2. Enter the following command:
set port internal-error-shutdown {<slot>/<port> |
<slot> | all-ports} enable
To disable IEDR, enter:
set port internal-error-shutdown {<slot>/<port> | <slot> |
all-ports} disable
This procedure globally enables IEDR for all ports in all hunt groups
on the switch.
* Note: (SPR 5909)
subjected to the hunt group IEDR setting if they are
placed in a hunt group whether they are
administratively disabled or enabled. Ports that are
enabled for IEDR before being placed in a hunt group
will still display when showing configuration but they
still will be subjected to take on the hunt group setting
until they are removed from the hunt group.
To globally enable IEDR for all ports in hunt groups:
1. Enter Global Configuration mode.
The CLI displays the <configure># prompt.
2. Enter the following command:
set huntgroup internal-error-shutdown enable
To globally disable IEDR for all ports in hunt groups, enter:
set huntgroup internal-error-shutdown disable
Configuring Port Parameters
All ports that are enabled for IEDR will be
5-45