Using the CLI
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Using VLANs, Spanning Tree, Hunt Groups, and VTP Snooping
Table 4-8. VTP Snooping Parameterscontinued
Parameter
Updater Identity
Update Timestamp
9. Click APPLY to save your changes, or CANCEL to restore
previous settings.
To configure VTP snooping using the CLI, enter the following
command in Configure mode:
<configure># set vtp-snooping enable
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Definition
Displays the IP address of the Cisco switch that
initiated the VTP configuration update.
Displays the date and time that the Cisco
switch initiated the VTP configuration update.
The format of the timestamp is "yy/mm/
dd.hh:mm:ss", where yy/mm/dd represents
the year, month, and day and hh:mm:ss
represents the hours, minutes, and seconds.
4-47